Electrophoretic-Anodes

Electrophoretic-Anodes (E-coat)

EGL-anode-assembly-box--cropped.jpg

 

Electrophoretic Anodes

De Nora DSA® anodes are used in anodic or cathodic E-coat operations to charge painting baths to allow complete coverage and consistent finishing across submerged parts.  Our anodes assure throwing power resulting in strong, uniform, finish and efficient use of paint.

Mixed-Metal Oxide (MMO) coated titanium anodes are characteristically lightweight and geometrically flexible.  This assures ease of installation and quick change-over on the coating line.  Unlike stainless steel, the titanium substrate does not dissolve in operation.  Therefore, iron contamination of the paint bath is minimalized which results in cleaner light-color paint, less sludge deposit in the anode cell, and maximum corrosion protection.  Insoluble anodes do not dissolve during their operation and can be refurbished extending service life to several years.

De Nora Tech, LLC

7590 Discovery Lane
Concord Ohio 44077
SurfaceFinishing@denora.com